跳转到主内容
英语
中文

正翻译步骤 2

步骤 2
Unscrew the Torx #8 screws holding the hard drive case in place on the logic board. Lift up on the hard drive to disconnect its ribbon cable from the logic board, just like in the previous steps.
  • Unscrew the Torx #8 screws holding the hard drive case in place on the logic board.

  • Lift up on the hard drive to disconnect its ribbon cable from the logic board, just like in the previous steps.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可