跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的13指南

英语
中文

正翻译步骤 1

步骤 1
Remove the following 3 screws:
  • Remove the following 3 screws:

  • Two 3 mm Phillips near the right speaker.

  • One 6 mm Phillips threaded through a hole in a plastic finger above the subwoofer.

  • Be careful not to over-tighten the screw above the subwoofer too tight or the plastic could crack.

  • Santa Rosa and Penryn MacBooks do not have a c-channel. If you are disassembling either of these models, remove only the single 3 mm Phillips screw from the right speaker and skip step 26.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可