跳转到主内容
英语
中文

正翻译步骤 3

步骤 3
The ribbon cable is attached to the motherboard by a ZIF (Zero Insertion Force) connector. Using the nylon or metal spudger, gently pop up the ZIF connector tab and remove the ribbon cable.  This will allow you to separate the front panel from the motherboard.
  • The ribbon cable is attached to the motherboard by a ZIF (Zero Insertion Force) connector.

  • Using the nylon or metal spudger, gently pop up the ZIF connector tab and remove the ribbon cable. This will allow you to separate the front panel from the motherboard.

  • Gently pull the front panel away and set it on your workstation.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可