跳转到主内容

修复你的物品

维修的权力

配件 & 工具

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 5

步骤 5
Disconnect the black fan connector and two temperature sensor connectors from the logic board by pulling/prying them directly up. Don't try to slide the connector plugs out of their sockets, in the same plane as the logic board, since that may break them.
  • Disconnect the black fan connector and two temperature sensor connectors from the logic board by pulling/prying them directly up.

  • Don't try to slide the connector plugs out of their sockets, in the same plane as the logic board, since that may break them.

  • If you have a MacBook Core 2 Duo Santa Rosa/Penryn/Early 2009, there is only one temperature sensor.

  • The heat sink in early 2009 MacBooks may look slightly different.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可