跳转到主内容
英语
中文

正翻译步骤 11

步骤 11
Once the digitizer is in place, push on it until the glue has spread everywhere and cure in UV light (oven or flashlight). You can press on any spot that has too little glue until the glue hardens.
Curing in UV light
  • Once the digitizer is in place, push on it until the glue has spread everywhere and cure in UV light (oven or flashlight). You can press on any spot that has too little glue until the glue hardens.

  • Reassemble the device by following the instructions in steps 1-6 in reverse order.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可