Skip to main content
英语
中文

正翻译步骤 10

Step 10
Apply LOCA glue like this. See a few Youtube videos on how to do it. Make a tape handle onto the screen (picture) and route the digitizer first through its hole at the top.
LOCA glue
  • Apply LOCA glue like this. See a few Youtube videos on how to do it.

  • Make a tape handle onto the screen (picture) and route the digitizer first through its hole at the top.

  • Slowly lower the glass onto the LCD. Any bubbles and you will have to remove the glass and start from step 8 over again. Trust me, the bubbles look horrible.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可