跳转到主内容
英语
中文

正翻译步骤 5

步骤 5
After a good twenty #00 Phillips screws were removed from the perimeter of the device, we managed to separate the rear cover. A ribbon cable for the rear control buttons and a hefty 40 pin cable responsible for transmitting information to the rear display still attached the rear cover to the rest of the camera.
  • After a good twenty #00 Phillips screws were removed from the perimeter of the device, we managed to separate the rear cover.

  • A ribbon cable for the rear control buttons and a hefty 40 pin cable responsible for transmitting information to the rear display still attached the rear cover to the rest of the camera.

  • Fun fact: to eliminate the complexities of a slip ring on the rotating rear display, its motion is limited to 180 degrees.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可