跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 2

步骤 2
Flip the logic board over so it is heat sink side down. Remove the following T10 Torx screws.
  • Flip the logic board over so it is heat sink side down.

  • Remove the following T10 Torx screws.

  • One short screw near the end of the heat sink.

  • Four screws around the CPU itself.

  • It may be necessary to use a #1 Phillips screwdriver to hold the spring loaded screw bosses stationary while you remove the four screws around the CPU.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可