修复你的物品

维修的权力

商店

返回指南
英语
中文
下一步

正翻译步骤 1

步骤 1
Remove the left 3 mm and right 8 mm (right screw is unnecessary to remove on some models)

  • Remove the left 3 mm and right 8 mm (right screw is unnecessary to remove on some models)

  • One 3.25mm Phillips #000 (Head: 4mm dia. x .5mm thick)

  • One 8.5mm Phillips #000 (Head: 4mm dia. x .75mm thick

  • The Phillips screws securing the MagSafe board and the left speaker to the lower case. The next two speaker steps are unnecessary one some models as are steps 16 and 17 as the magsafe will drop in without removing these.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下，你的投稿已被许可。