翻译步骤＃4 - Canon EOS 60D Rear Cover Removal - iFixit

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南。

英语

中文

上一步下一步

正翻译步骤 4

步骤 4

Using the plastic opening tool, carefully pull up the rubber grip around the port side of the camera.

Remove the four different sized screws located beneath the rubber grip.

Using the plastic opening tool, carefully pull up the rubber grip around the port side of the camera.
Remove the four different sized screws located beneath the rubber grip.
6 mm Phillips #PH00 screw.
3.4 mm Phillips #PH00 screw.
3.9 mm Phillips #PH00 screw.
2.2 mm Phillips #PH00 screw.

在开源创作共享许可协议下，你的投稿已被许可。