跳转到主内容
英语
西班牙语

正翻译步骤 3

步骤 3
Set the DVD drive on its side, with the two rubber grommets along the front of the drive facing you. Insert the end of the skinny screwdriver into the hole in the center of the lower rubber grommet along the front of the DVD drive housing.
  • Set the DVD drive on its side, with the two rubber grommets along the front of the drive facing you.

  • Insert the end of the skinny screwdriver into the hole in the center of the lower rubber grommet along the front of the DVD drive housing.

  • Pull the screwdriver straight up until the grommet is free.

Coloca la unidad de DVD de costado, con las dos arandelas de goma a lo largo de la parte frontal de la unidad hacia ti.

Inserta el extremo del destornillador delgado en el orificio en el centro de la arandela de goma inferior a lo largo de la parte frontal de la carcasa de la unidad de DVD.

Tira del destornillador hacia arriba hasta que la arandela quede libre.

在开源创作共享许可协议下,你的投稿已被许可