跳转到主内容
英语
中文

正翻译步骤 1

步骤 1
The following steps are only necessary if your replacement Wii DVD drive does not include the four rubber grommets along the front and rear of the DVD drive housing. Insert the tip of a long, skinny screwdriver into the hole in the center of the first grommet on the rear of the DVD drive housing. Pull the grommet straight away from the DVD drive housing until it is free.
  • The following steps are only necessary if your replacement Wii DVD drive does not include the four rubber grommets along the front and rear of the DVD drive housing.

  • Insert the tip of a long, skinny screwdriver into the hole in the center of the first grommet on the rear of the DVD drive housing.

  • Pull the grommet straight away from the DVD drive housing until it is free.

如果你的wii光驱外壳前后没有四个橡胶圈的话,以下步骤很重要

将一个又长又细的螺丝刀插入光驱外壳背面第一个密封圈的孔,推开密封圈

直接拉动驱动器外壳,直到它松动

在开源创作共享许可协议下,你的投稿已被许可