修复你的物品 维修的权力 商店

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的19指南。

返回指南
英语
中文
下一步

正翻译步骤 1

步骤 1
Use the tip of a spudger to pull the right speaker/subwoofer cable out from under the retaining finger molded into the upper case. Pull the right speaker/subwoofer cable upward to lift the connector out of its socket on the logic board.

  • Use the tip of a spudger to pull the right speaker/subwoofer cable out from under the retaining finger molded into the upper case.

  • Pull the right speaker/subwoofer cable upward to lift the connector out of its socket on the logic board.

使用撬棒的尖端把扬声器电线拔出来。

用手把右边扬声器电线往上提，把接口取出主板。

在开源创作共享许可协议下，你的投稿已被许可。