修复你的物品

维修的权力

商店

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的23指南。

返回指南
英语
日语
下一步

正翻译步骤 1

步骤 1
Remove two Phillips screws securing the battery connector bracket to the logic board, of the following lengths:

  • Remove two Phillips screws securing the battery connector bracket to the logic board, of the following lengths:

  • One 2.9 mm screw

  • One 2.3 mm screw

  • Throughout this guide, keep careful track of your screws so that each one goes back where it came from during reassembly. Installing a screw in the wrong place can cause permanent damage.

基板に留められたバッテリーコネクターブラケットから、次のプラスネジを取り外します。

2.9 mmネジー1本

2.3 mmネジー1本

[* black] Remove the following Phillipstwo Phillips screws securing the battery connector bracket to the logic boardboard, of the following lengths:
[* black] Remove the following Phillipstwo Phillips screws securing the battery connector bracket to the logic boardboard, of the following lengths:
[* red] One 2.9 mm screw
[* orange] One 2.3 mm screw
[* icon_reminder] Throughout this guide, [product|IF145-167-4|keep careful track of your screws|new_window=true] so that each one goes back where it came from during reassembly. Installing a screw in the wrong place can cause permanent damage.

在开源创作共享许可协议下，你的投稿已被许可。