跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 4

步骤 4
If you successfully removed all three adhesive strips, move on to the next step. Otherwise, you will need to pry the battery from the rear case.
Alternative methods to unstick the battery from the case
  • If you successfully removed all three adhesive strips, move on to the next step. Otherwise, you will need to pry the battery from the rear case.

  • Prepare an iOpener and apply it to the back of the rear case, directly over the battery. Otherwise, you can apply heat using a heat gun or hair dryer.

  • Overheating the iPhone may ignite the battery.

  • Don't try to forcefully lever the battery out. If needed, apply a few more drops of alcohol to further weaken the adhesive. Never deform or puncture the battery with your pry tool.

  • Do not insert the spudger in the area between the volume down (-) button and the top edge of the battery, or you may damage the volume control cable lying underneath. Do not pry against the logic board or you may damage the phone.

  • Alternatively, a piece of dental floss may be used to separate the battery from the rear case. A stronger alternative to dental floss is an unwound guitar string, such as a 0.009 E string from a 12-string set.

  • Thread the floss or string behind the upper battery corners, bring the ends together, wrap them around a folded cloth, and pull evenly.

假若你已经成功将胶带撕掉, 请直接进行下一步骤。不然你就必须从后盖来撬开你的电池。

你需要准备一个iOpener,使用iOpener从机后盖加热电池对应的区域。或者,你也可以使用热风枪或吹风机。

过度加热iPhone可能会让电池着火

不要尝试用蛮力撬出电池。 如果需要,再滴几滴酒精以进一步削弱粘合剂。 切勿用撬具使电池变形或刺破电池。

请勿将撬棒插入音量减小 (-) 按钮和电池顶部边缘之间的区域,否则可能会损坏下方的音量控制电缆。也不要去撬逻辑板,否则可能会损坏iPhone。

或者,可以用牙线来分离电池。 更好的替代品是未缠绕的吉他弦,例如 12 弦套装中的 0.009 E 弦。

将牙线或吉他弦穿在电池上方的一角,然后将两端放在一起,把它们用折叠起来的布包裹,然后均匀地拉动。

在开源创作共享许可协议下,你的投稿已被许可