修复你的物品 维修的权力 商店

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 3

步骤 3
Gently pull the battery adhesive tabs away from the battery, toward the bottom of the iPhone. To avoid tearing the adhesive strip, be careful not to pull against the battery or lower components. Pull steadily, maintaining constant tension on the strips as they slip out from between the battery and the rear case. For best results, pull the strips at a 60º angle or less.

  • Gently pull the battery adhesive tabs away from the battery, toward the bottom of the iPhone.

  • To avoid tearing the adhesive strip, be careful not to pull against the battery or lower components.

  • Pull steadily, maintaining constant tension on the strips as they slip out from between the battery and the rear case. For best results, pull the strips at a 60º angle or less.

  • The strips will stretch to many times their original length. Continue pulling and re-grab the strips near the battery if necessary.

  • Hold down the battery with one hand as you pull, or the elastic strips may fling the battery from the phone once they're separated from the rear case.

  • If the adhesive breaks off underneath the battery and can't be retrieved, refer to the previous step for instructions on how to unstick the battery. See the next step for additional methods.

捏住胶带的边缘, 轻缓地向屏幕底部用力拉出。

不要朝电池方向反折用力，或者压到手机底部的元器件, 否则你可能会把拉胶弄断。

撕的过程, 保持力道稳定, 直到胶带从电池和后盖完全拔出。若你想顺利的完成, 最佳的撕胶角度为60º 或比60º 更小皆可。

胶带在撕的过程中, 会造成胶带的长度比原先的还长好几倍, 但没关系, 就请继续拉扯, 必要的时候, 可从靠近电池附近的地方开始撕。

在你撕掉胶带的同时, 请用手将电池固定住, 不然在你撕完胶带后, 电池可能会连同胶带一同被甩出。

如果电池下方的粘合剂脱落且无法挽救，请参阅上一步以获取有关如何取下电池的说明。 有关其他方法，请参阅下一步。

在开源创作共享许可协议下，你的投稿已被许可。