Skip to main content
英语
中文

正翻译步骤 8

Step 8
If you successfully removed all three adhesive strips, move on to the next step. Otherwise, you will need to pry the battery from the rear case. Prepare an iOpener and apply it to the back of the rear case, directly over the battery. Alternatively, you can apply heat using a heat gun or  hair dryer.
  • If you successfully removed all three adhesive strips, move on to the next step. Otherwise, you will need to pry the battery from the rear case.

  • Prepare an iOpener and apply it to the back of the rear case, directly over the battery. Alternatively, you can apply heat using a heat gun or hair dryer.

  • After about a minute, flip the phone over and use a plastic card to tear through any remaining adhesive.

假若你已经成功将胶带撕掉, 请直接到下个步骤。不然你就必须从后盖来撬开你的电池。

你需要准备一个iOpener, 使用iOpener从机后盖加热电池对应的区域。或者你也可以选择适用加热枪或吹风机做为加热的作用。

放置一分钟后, 将手机转为正面, 并插入塑胶卡, 以分离电池后面的粘合剂。

在开源创作共享许可协议下,你的投稿已被许可