跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的24本指南

英语
中文

正翻译步骤 3

Step 3
Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case. Pulling too hard may damage the display assembly. Apply just enough pressure to create a small gap between the display assembly and the rear case.
  • Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case.

  • Pulling too hard may damage the display assembly. Apply just enough pressure to create a small gap between the display assembly and the rear case.

使用巧劲拉动吸盘, 直到屏幕与后盖中间出现缝隙为止。

注意, 若拉太大力会造成屏幕损坏。只要打开到让显示屏与后盖有个小缝隙即可。

在开源创作共享许可协议下,你的投稿已被许可