修复你的物品

维修的权力

商店

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的21指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 5

步骤 5
Make sure the battery is disconnected before you disconnect or reconnect the cable in this step. Disconnect the home button/fingerprint sensor cable by prying it straight up from its socket on the logic board.

  • Make sure the battery is disconnected before you disconnect or reconnect the cable in this step.

  • Disconnect the home button/fingerprint sensor cable by prying it straight up from its socket on the logic board.

使用塑料Opening 工具断开显示排线接口, 与主板分离。

[* black] Use a plastic opening tool toicon_caution] Make sure the battery is disconnected before you disconnect or reconnect the cable in this step.
[* black] Disconnect the display datahome button/fingerprint sensor cable by prying it straight up from its socket on the logic board.
[* black] Use a plastic opening tool toicon_caution] Make sure the battery is disconnected before you disconnect or reconnect the cable in this step.
[* black] Disconnect the display datahome button/fingerprint sensor cable by prying it straight up from its socket on the logic board.

在开源创作共享许可协议下，你的投稿已被许可。