修复你的物品 社区 商店

MacBook Pro 13“Unibody早期 2011款光驱更换

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的7指南。

返回指南
英语
中文

正翻译步骤 1

步骤 1
MacBook Pro 13" Unibody Early 2011 Optical Drive Replacement: 步骤 0 中的图像 1，2 MacBook Pro 13" Unibody Early 2011 Optical Drive Replacement: 步骤 0 中的图像 2，2

  • Pull the optical drive cable away from the optical drive.

  • Be sure to pull on the connector, not the cable itself.

  • Remove the two black Phillips #0 screws securing the small metal mounting bracket. Transfer this bracket to your new optical drive or hard drive enclosure.

将光驱电路拉出光驱。

一定要拉出光驱，而不是电路本身。

拆下固定小金属安装支架的两个黑色的十字槽＃0螺丝。 将此支架转移到新的光驱或硬盘。

[* black] Pull the optical drive cable away from the optical drive.
[* icon_caution] Be sure to pull on the connector, not the cable itself.
-[* red] Remove the two black Phillips #0 screws securing the small metal mounting bracket. Transfer this bracket to your new optical drive or [product|IF107-080|hard drive enclosure].
+[* red] Remove the two black Phillips #0 screws securing the small metal mounting bracket. Transfer this bracket to your new optical drive or [product|IF107-080|hard drive enclosure|new_window=true].

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。