注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的64指南。
正翻译步骤 1
步骤 1
-
Remove the following ten screws:
-
Three 14.4 mm Phillips #00 screws
-
Three 3.5 mm Phillips #00 screws
-
Four 3.5 mm shouldered Phillips #00 screws
| [* black] Remove the following ten screws: |
| [* red] Three 14.4 mm Phillips #00 screws |
| [* orange] Three 3.5 mm Phillips #00 screws |
| [* yellow] Four 3.5 mm shouldered Phillips #00 screws |
| [* icon_note] When replacing the small screws, align them perpendicular to the slight curvature of the case (they don't go straight down). |