跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
法语

正翻译步骤 1

步骤 1
Disconnect: Touch screen flex cable LCD Display flex cable
  • Disconnect:

  • Touch screen flex cable

  • LCD Display flex cable

  • Charging Dock board flex cable - remove the foam and tape, then flip up the black lock before easing out the flex.

  • Coaxial antena cable - take your time here, be sure to pull the metal connector and not the cable or you risk pulling the cable from the connector.

  • Remove the 2x Torx T4 screws.

Déconnectez :

La nappe de la vitre tactile

La nappe de l'écran LCD

La nappe de la carte du connecteur de dock

Câble coaxial d'antenne

Retirez les deux vis Torx T4.

[* black] Disconnect:
[* red] Touch screen flex cable
[* light_blue] LCD Display flex cable
- [* yellow] Charging Dock board flex cable
- [* green] Coaxial antena cable
+ [* yellow] Charging Dock board flex cable - remove the foam and tape, then flip up the black lock before easing out the flex.
+ [* green] Coaxial antena cable - take your time here, be sure to pull the metal connector and not the cable or you risk pulling the cable from the connector.
[* violet] Remove the 2x Torx T4 screws.

在开源创作共享许可协议下,你的投稿已被许可