跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 1

步骤 1
The LCD and digitizer remains.
  • The LCD and digitizer remains.

  • The Touch ID function will ONLY work with your phone's original home button assembly, so you'll need to transfer the home button assembly from your old display assembly to your new display assembly to retain Touch ID.

  • After reassembly, clean the touchscreen surface with an alcohol wipe prior to turning the iPhone back on. The alcohol helps dissipate any lingering static electricity, which can cause problems with the display.

  • After reassembly, connect the iPhone to an AC power source before turning it on for the first time. Once the iPhone has booted up successfully, you can disconnect the AC power.

最后就剩下前面板。

请注意, Touch ID 指纹识别传感器功能, 只能用于原本的手机Home键。 假若你要保有原来指纹识别的功能的话, 你就必须使用原本旧的Home键。

在重新组装后, 建议用酒精将感应屏幕擦拭干净。使用酒精清洁可以避免静电产生进而造成屏幕损坏 。

在重新组装后, 开机前, 请先将手机接上AC电源, 若手机顺利开启后, 再将AC电源移除。

[* black] Front panelThe LCD and digitizer remains.
[* black] Front panelThe LCD and digitizer remains.
[* icon_reminder] The Touch ID function will '''ONLY''' work with your phone's original home button assembly, so you'll need to transfer the home button assembly from your old display assembly to your new display assembly to retain Touch ID.
[* icon_note] After reassembly, clean the touchscreen surface with an alcohol wipe prior to turning the iPhone back on. The alcohol helps dissipate any lingering static electricity, which can cause problems with the display.
[* icon_caution] After reassembly, connect the iPhone to an AC power source before turning it on for the first time. Once the iPhone has booted up successfully, you can disconnect the AC power.

在开源创作共享许可协议下,你的投稿已被许可