跳转到主内容
英语
中文

正翻译步骤 1

步骤 1
Remove the two 2.0 mm Phillips screws securing the power button bracket to the outer case. Slightly pull the power button cable bracket away from the outer case. If the power button happens to accidentally fall out, take note of the correct orientation. The metal loop should be facing downwards and the outward edges should be on top.
  • Remove the two 2.0 mm Phillips screws securing the power button bracket to the outer case.

  • Slightly pull the power button cable bracket away from the outer case.

  • If the power button happens to accidentally fall out, take note of the correct orientation. The metal loop should be facing downwards and the outward edges should be on top.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可