跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的4指南

英语
西班牙语

正翻译步骤 4

步骤 4
The rubber gasket surrounding the home button is very thin and tears easily. Apply mild heat (with an iOpener, heat gun, or hair dryer) to soften the adhesive securing the home button gasket.
  • The rubber gasket surrounding the home button is very thin and tears easily.

  • Apply mild heat (with an iOpener, heat gun, or hair dryer) to soften the adhesive securing the home button gasket.

  • Using your fingertip, gently press up on the home button from the front side of the display assembly. Use firm, constant pressure to slowly separate the home button's rubber gasket from the front panel.

Con la punta del dedo, presiona suavemente hacia arriba el botón de inicio en la parte frontal del ensamblaje de la pantalla para separar lentamente la junta de goma del botón de inicio del panel frontal.

La junta es muy delgada y se rompe fácilmente. Aplica presión constante y dale tiempo para separarse.

-[* black] Using your fingertip, gently press up on the home button from the front side of the display assembly to slowly separate the home button's rubber gasket from the front panel.
- [* icon_caution] The gasket is very thin and will tear easily. Apply steady pressure and give it time to separate.
+[* icon_caution] The rubber gasket surrounding the home button is very thin and tears easily.
+[* black] Apply mild heat (with an [product|IF145-198-2|iOpener], heat gun, or hair dryer) to soften the adhesive securing the home button gasket.
+[* black] Using your fingertip, gently press up on the home button from the front side of the display assembly. Use firm, constant pressure to slowly separate the home button's rubber gasket from the front panel.

在开源创作共享许可协议下,你的投稿已被许可