翻译步骤＃1 - GoPro Hero4 Silver Front Panel Replacement - iFixit

修复你的物品

维修的权力

商店

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南。

英语

中文

正翻译步骤 1

步骤 1

Start by removing the silver plastic face from the camera using a plastic opening tool. Insert the plastic opening tool into the middle of each edge and lift up the tabs that keep the camera face on.

The seven plastic tab locations are marked in red.

Try using the plastic opening tool before switching to the metal spudger. We tried using the plastic opening tool to pry the camera face off, but found that it did not give us enough leverage.

Start by removing the silver plastic face from the camera using a plastic opening tool. Insert the plastic opening tool into the middle of each edge and lift up the tabs that keep the camera face on.
The seven plastic tab locations are marked in red.
Try using the plastic opening tool before switching to the metal spudger. We tried using the plastic opening tool to pry the camera face off, but found that it did not give us enough leverage.
There may be glue holding the camera face on to the housing. Be careful not to flex the camera face too much, or it will crack.

在开源创作共享许可协议下，你的投稿已被许可。