跳转到主内容
英语
中文

正翻译步骤 2

步骤 2
Remove two 3 mm x 5.5 mm Phillips head screws from either side of the viewfinder. Remove four 3 mm x 5.5 mm Phillips head screws above and below the USB port cover and above and below the SD card slot cover. Remove two 3 mm x 4 mm Phillips head screws inside the SD card slot cover.
  • Remove two 3 mm x 5.5 mm Phillips head screws from either side of the viewfinder.

  • Remove four 3 mm x 5.5 mm Phillips head screws above and below the USB port cover and above and below the SD card slot cover.

  • Remove two 3 mm x 4 mm Phillips head screws inside the SD card slot cover.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可