修复你的物品 社区 商店

Remplacement du boitier arrière de la tablette Nvidia Shield

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南。

返回指南
英语
法语
上一步 下一步

正翻译步骤 2

步骤 2
Nvidia Shield Tablet Rear Case Replacement: 步骤 0 中的图像 1，3 Nvidia Shield Tablet Rear Case Replacement: 步骤 0 中的图像 2，3 Nvidia Shield Tablet Rear Case Replacement: 步骤 0 中的图像 3，3

  • Set the tablet so the buttons, microSD, and stylus port are facing you.

  • Open the microSD slot.

  • Using the flat end of the spudger tool, carefully pry open the case starting from the microSD slot, slowly sliding the spudger along the inside edge of the case.

  • You may want to put on your anti-static wrist strap at this point as the motherboard will be vulnerable to physical touch and electrostatic shock after the casing is removed.

Réglez la tablette de sorte que les boutons, la microSD et le port du stylet soient face à vous.

Ouvrez le slot microSD.

À l'aide de l'extrémité plate de l'outil spudger, faites levier doucement pour ouvrir le boîtier en commençant par le connecteur microSD, en faisant glisser lentement le spudger le long du bord intérieur du boîtier.

Vous voudrez peut-être mettre votre bracelet antistatique à ce stade, car la carte mère sera vulnérable au contact physique et aux chocs électrostatiques après le retrait du boîtier.

[* black] Set the tablet so the buttons, microSD, and stylus port are facing you.
[* red] Open the microSD slot.
[* black] Using the flat end of the spudger tool, carefully pry open the case starting from the microSD slot, slowly sliding the spudger along the inside edge of the case.
-[* icon_caution] You may want to put on your anti-static wrist strap at this point as the motherboard will be vulnerable to physical touch and electrostatic shock after the casing is removed.
+[* icon_caution] You may want to put on your [product|IF145-071|anti-static wrist strap] at this point as the motherboard will be vulnerable to physical touch and electrostatic shock after the casing is removed.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。