跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的16指南

英语
中文

正翻译步骤 2

步骤 2
Use the edge of a plastic opening tool to gently pry the battery connector up from its socket on the logic board.
  • Use the edge of a plastic opening tool to gently pry the battery connector up from its socket on the logic board.

  • Be very careful to only pry up on the battery connector and not the socket on the logic board. If you pry up on the logic board socket, you may break it entirely.

  • Remove the metal clip covering the antenna connector.

用塑料撬棒将电池排线从主板的电池座上分离出来。

注意小心将排线挑起即可不要撬到主板,如果将电池座撬起,将彻底损坏电池座。

取下天线的金属屏蔽盖。

在开源创作共享许可协议下,你的投稿已被许可