跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 5

步骤 5
Do not completely remove the main circuit board from the camera. A soldered ribbon cable still attaches the board to the camera. Complete removal would break the soldering points. In a hinge-like motion, gently lift the bottom of the main circuit board, which is the side without the soldering points.
  • Do not completely remove the main circuit board from the camera. A soldered ribbon cable still attaches the board to the camera. Complete removal would break the soldering points.

  • In a hinge-like motion, gently lift the bottom of the main circuit board, which is the side without the soldering points.

  • Gently detach the white ribbon cable from the underside of the main circuit board.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可