跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 2

步骤 2
Lift the end of the SSD up enough to pass over the speaker directly behind it. Do not lift the SSD too high, or you could damage the contacts or socket. Pull the SSD straight out of its socket on the logic board.
  • Lift the end of the SSD up enough to pass over the speaker directly behind it.

  • Do not lift the SSD too high, or you could damage the contacts or socket.

  • Pull the SSD straight out of its socket on the logic board.

把SSD抬起足够高来从扬声器上方拿出

不要把SSD抬得太高,否则你可能会损坏触点或者插槽

把SSD从主板上的插槽中拉出

在开源创作共享许可协议下,你的投稿已被许可