PlayStation SCPH-5501 Motor Speed Adjustment (KSM-440ADM/AEM+)

英语

中文

上一步下一步

正翻译步骤 5

步骤 5

PlayStation SCPH-5501 Motor Speed Adjustment (KSM-440ADM/AEM+), Adjust the motor trimpot: 步骤 0 中的图像 1，3

PlayStation SCPH-5501 Motor Speed Adjustment (KSM-440ADM/AEM+), Adjust the motor trimpot: 步骤 0 中的图像 2，3

PlayStation SCPH-5501 Motor Speed Adjustment (KSM-440ADM/AEM+), Adjust the motor trimpot: 步骤 0 中的图像 3，3

Adjust the motor trimpot

EET owners: Your kit has this bit. No purchase needed.
Only adjust this enough to reliably read games and music CDs again. If the speed is too slow, the laser may physically "burn" your games, albeit very unlikely unless you adjust the laser trimpot on the mainboard.
Consider anything less then a 80-90% read rate a failure. These are hard to recover reliably.
Before starting, mark the original adjustment point and write down the factory setting as tested. It will be difficult to take it back to stock without this information.
Adjust the trimpot incrementally using a Phillips PH1 or other compatible bit. Do this until the laser is reading games more consistently.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。