翻译步骤＃2 - Nintendo DS Lite Motherboard Replacement - iFixit

修复你的物品

维修的权力

配件 & 工具

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的12本指南。

英语

中文

上一步下一步

正翻译步骤 2

步骤 2

In the following steps you must pull the antenna cable between the DS Lite game cartridge reader and motherboard. Pull slowly and stop when you feel resistance to avoid damaging the cable or motherboard.

Position the antenna cable with its connector facing up and away from the motherboard using a spudger to hold it down lightly in the gap between chips on the motherboard.

Slowly and carefully pull the antenna cable until the cable connector is under the DS Lite game cartridge reader.

In the following steps you must pull the antenna cable between the DS Lite game cartridge reader and motherboard. Pull slowly and stop when you feel resistance to avoid damaging the cable or motherboard.
Position the antenna cable with its connector facing up and away from the motherboard using a spudger to hold it down lightly in the gap between chips on the motherboard.
Slowly and carefully pull the antenna cable until the cable connector is under the DS Lite game cartridge reader.
Continue pulling the cable until the cable connector comes out from under the game cartridge reader on the right side.
When reassembling and attempting to feed the antenna cable back under the game cartridge reader, the cable may kink or become difficult to feed through. If so, try feeding a piece of thread through first; then, tie the thread to one end of the cable connector and pull it through, guiding it past any obstructions.

在开源创作共享许可协议下，你的投稿已被许可。