跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
中文

正翻译步骤 1

步骤 1
Unless stated otherwise, use a Phillips #00 screwdriver to remove all screws. On the backside of the camera, remove the 4.75 mm screw that sits at the top right corner.
  • Unless stated otherwise, use a Phillips #00 screwdriver to remove all screws.

  • On the backside of the camera, remove the 4.75 mm screw that sits at the top right corner.

  • Remove the four 4.75 mm screws that sit at the bottom of the camera.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可