修复你的物品

维修的权力

商店

返回指南
英语
中文
上一步 下一步

正翻译步骤 11

步骤 11
Remove the card and again slide it under the top edge of the battery, near the center. Be extremely careful to slide the card over the front-facing camera and headphone jack cables to avoid cutting them. Slide the card in as far as it will go, breaking through as much of the adhesive as you can.

  • Remove the card and again slide it under the top edge of the battery, near the center.

  • Be extremely careful to slide the card over the front-facing camera and headphone jack cables to avoid cutting them.

  • Slide the card in as far as it will go, breaking through as much of the adhesive as you can.

  • Lift up on the card to pry the second battery cell up from the rear case.

  • If there is significant resistance from the battery when you try to pry it up, reheat the adhesive with an iOpener and repeat the previous 3 steps to break apart the adhesive as necessary.

取出卡并再次将其滑入电池顶部边缘下方，靠近中心位置。

要非常小心地将塑料卡滑过前置摄像头和耳机插孔电缆，以避免切断它们。

尽可能地滑动卡片，尽可能多地分离粘合剂。

向上提起卡，从后壳上撬起第二块电池。

如果试图撬起电池时，电池有很大阻力，请用iOpener重新加热粘合剂，然后重复上述3个步骤，以便根据需要分离粘合剂。

在开源创作共享许可协议下，你的投稿已被许可。