跳转到主内容

Fix Your Stuff

Right to Repair

Parts & Tools

英语
中文

正翻译步骤 6

步骤 6
Push the plastic card about two inches underneath the battery, and lift it up to pry the first battery cell off the rear case. If the battery begins to bend, use an iOpener to apply heat to the back of the battery and repeat the previous two steps to adequately break up the battery adhesive. If the battery begins to bend, use an iOpener to apply heat to the back of the battery and repeat the previous two steps to adequately break up the battery adhesive.
  • Push the plastic card about two inches underneath the battery, and lift it up to pry the first battery cell off the rear case.

  • If the battery begins to bend, use an iOpener to apply heat to the back of the battery and repeat the previous two steps to adequately break up the battery adhesive.

将塑料卡推入电池下方约两英寸,然后将其抬起,将第一个电池从后壳上撬开。

如果电池开始弯曲,请使用iOpener向背壳加热,并重复前两个步骤以充分分离电池粘合剂。

在开源创作共享许可协议下,你的投稿已被许可