跳转到主内容
英语
西班牙语

正翻译步骤 6

步骤 6
Push the plastic card about two inches underneath the battery, and lift it up to pry the first battery cell off the rear case. If the battery begins to bend, use an iOpener to apply heat to the back of the battery and repeat the previous two steps to adequately break up the battery adhesive. If the battery begins to bend, use an iOpener to apply heat to the back of the battery and repeat the previous two steps to adequately break up the battery adhesive.
  • Push the plastic card about two inches underneath the battery, and lift it up to pry the first battery cell off the rear case.

  • If the battery begins to bend, use an iOpener to apply heat to the back of the battery and repeat the previous two steps to adequately break up the battery adhesive.

Empuja la tarjeta de plástico aproximadamente dos pulgadas debajo de la batería y levántala para sacar la primera celda de la batería de la carcasa trasera.

Si la batería comienza a doblarse, usa un iOpener para aplicar calor en la parte posterior de la batería y repite los dos pasos anteriores para romper adecuadamente el adhesivo de la batería.

在开源创作共享许可协议下,你的投稿已被许可