跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 1

步骤 1
Reheat the iOpener in the microwave for 30 seconds. Remember to be careful not to overheat the iOpener during the repair procedure. Wait at least two minutes before reheating the iOpener, and never microwave it for more than 30 seconds. Place the heated iOpener in the center of the back of the iPad. Keep it there for 90 seconds to soften the battery adhesive.
  • Reheat the iOpener in the microwave for 30 seconds.

  • Remember to be careful not to overheat the iOpener during the repair procedure. Wait at least two minutes before reheating the iOpener, and never microwave it for more than 30 seconds.

  • Place the heated iOpener in the center of the back of the iPad. Keep it there for 90 seconds to soften the battery adhesive.

  • Move the iOpener to the right (away from the rear-facing camera), and keep it there for another 90 seconds.

  • Finally, place the iOpener near the right-hand edge of the iPad for 90 seconds.

  • You will likely need to repeat this step several times throughout the rest of the procedure to ensure the adhesive remains soft.

  • The iOpener may cool significantly. If so, reheat it for another 30 seconds between each position.

使用微波炉给iOpener加热大概30秒。

切记小心不要在维修过程中过热iOpener。 等待至少两分钟再重新加热iOpener,并且加热时间不超过30秒。

将加热的iOpener放在iPad背面的中央。 放置90秒以软化电池粘合剂。

将iOpener向右移动(远离后置摄像头),并保持90秒。

最后,将iOpener放置在iPad的右边缘90秒。

在整个过程中,您可能需要多次重复此步骤以确保粘合剂保持柔软。

iOpener可能会显著降温。 如果是这样,每个位置之间需要再加热30秒。

在开源创作共享许可协议下,你的投稿已被许可