Fix Your Stuff

Right to Repair

Parts & Tools

注：你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 26

步骤 26
Slide a plastic card underneath the center of the logic board, pushing it in as far as it will go. Slowly swing the left edge of the logic board up, while making sure it doesn't snag against any of the disconnected cables.

  • Slide a plastic card underneath the center of the logic board, pushing it in as far as it will go.

  • Slowly swing the left edge of the logic board up, while making sure it doesn't snag against any of the disconnected cables.

  • If any portion of the logic board requires excessive force to pry up, stop prying, re-apply the iOpener, and re-perform the corresponding guide steps to fully release the adhesive.

将塑料卡滑入逻辑板中央下方，尽可能将其多的推入。

慢慢地向上摆动逻辑板的左边缘，同时确保它不会阻挡任何断开的电缆。

如果逻辑板的任何部分需要过大的力量撬起，停止撬动，重新使用iOpener，并重新执行相应的引导步骤以完全分离粘合剂。

在开源创作共享许可协议下，你的投稿已被许可。