iPad Air 2 Wi-Fi 前面板拆解程序

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的18本指南。

英语

中文

正翻译步骤 2

步骤 2

The following steps involve using an iOpener to soften the adhesive holding the front panel assembly in place. When using the iOpener, be sure to heat it in the microwave for no more than 30 seconds.
Handling it by the tabs on either end, place a heated iOpener over the top edge of the iPad.
Let the iOpener sit on the iPad for two minutes to soften the adhesive securing the front panel to the rest of the iPad.