跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的17本指南

英语
中文

正翻译步骤 2

步骤 2
The following steps involve using an iOpener to soften the adhesive holding the front panel assembly in place. When using the iOpener, be sure to heat it in the microwave for no more than 30 seconds.
  • The following steps involve using an iOpener to soften the adhesive holding the front panel assembly in place. When using the iOpener, be sure to heat it in the microwave for no more than 30 seconds.

  • Handling it by the tabs on either end, place a heated iOpener over the top edge of the iPad.

  • Let the iOpener sit on the iPad for two minutes to soften the adhesive securing the front panel to the rest of the iPad.

接下来的几部将会需要用到iOpener来软化前面板下方的粘合剂。 当在微波炉中加热iOpener时切勿加热超过30秒。

抓住已经加热的iOpener的任意一端,将其放置在iPad的顶端。

将iOpener放置至少2分钟来软化面板下方的粘合剂。

在开源创作共享许可协议下,你的投稿已被许可