跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的6本指南

英语
中文

正翻译步骤 1

步骤 1
Remove the 2 screws (2.41 mm long) on the side of the camera next to the LCD screen. Remove the 2 screws (4.08 mm) on the other side.  One is located under the rubber USB flap. Remove the last screw (2.59 mm) located on the bottom of the camera.
  • Remove the 2 screws (2.41 mm long) on the side of the camera next to the LCD screen.

  • Remove the 2 screws (4.08 mm) on the other side. One is located under the rubber USB flap.

  • Remove the last screw (2.59 mm) located on the bottom of the camera.

  • Slowly pull the back cover of the camera.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可