跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的4指南

英语
中文

正翻译步骤 2

步骤 2
Lift the trackpad cable up off the battery to separate it from the adhesive securing it. Be careful not to damage the cable. If it doesn't peel up easily, apply a little heat from an iOpener, heat gun, or hair dryer to soften the adhesive, and try again.
  • Lift the trackpad cable up off the battery to separate it from the adhesive securing it.

  • Be careful not to damage the cable. If it doesn't peel up easily, apply a little heat from an iOpener, heat gun, or hair dryer to soften the adhesive, and try again.

  • If you are installing a new trackpad cable, be sure to fold the new cable to match the shape of the old cable. The new cable will appear to be too long if it is not folded.

从电池固定胶带上拉起触摸板线缆。

注意不要损坏线缆。如果它不是很容易被拉起来,用iOpener、热枪或者吹风机加热一下来软化粘合剂,并重试。

[* black] Lift the trackpad cable up off the battery to separate it from the adhesive securing it.
[* icon_caution] Be careful not to damage the cable. If it doesn't peel up easily, apply a little heat from an iOpener, heat gun, or hair dryer to soften the adhesive, and try again.
+ [* icon_reminder] If you are installing a new trackpad cable, be sure to fold the new cable to match the shape of the old cable. The new cable will appear to be too long if it is not folded.

在开源创作共享许可协议下,你的投稿已被许可