跳转到主内容

修复你的物品

维修的权力

配件 & 工具

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的12指南

英语
中文

正翻译步骤 15

步骤 15
Use the flat end of a spudger to disconnect the USB-C port cable bracket by prying it straight up from the logic board. To reconnect this cable, first line up the metal bracket over the screw holes, then press down on the middle of the bracket. Make sure it's aligned correctly, or you may damage the connector.
  • Use the flat end of a spudger to disconnect the USB-C port cable bracket by prying it straight up from the logic board.

  • To reconnect this cable, first line up the metal bracket over the screw holes, then press down on the middle of the bracket. Make sure it's aligned correctly, or you may damage the connector.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可