跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的17指南

英语
中文

正翻译步骤 26

步骤 26
To reduce the risk of a short, you can use a battery isolation pick to disconnect the battery. The battery isolation pick or battery blocker is an outdated way of isolating the battery, as you risk damaging the battery pins underneath the logic board. If you use this method, take extreme care to insert it gently and straight in the direction of the logic board. Do not twist or swing the pick side to side.
  • To reduce the risk of a short, you can use a battery isolation pick to disconnect the battery.

  • The battery isolation pick or battery blocker is an outdated way of isolating the battery, as you risk damaging the battery pins underneath the logic board. If you use this method, take extreme care to insert it gently and straight in the direction of the logic board. Do not twist or swing the pick side to side.

  • Slide a battery isolation pick underneath the battery connector area of the logic board, and leave it in place while you work.

为了防止触电的风险,您可以使用一个电池撬片来切断电池的连接。

电池隔离器或电池阻隔器是一种过时的电池隔离方式,因为您可能会损坏逻辑板下方的电池引脚。 如果您使用这种方法,请特别小心地将其轻轻地笔直地插入逻辑板的方向。 不要左右扭转或摆动撬片。

将电池隔离片滑到逻辑板的电池连接器区域下方,并在工作时将其留在原位。

在开源创作共享许可协议下,你的投稿已被许可