Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的37指南

英语
意大利语

正翻译步骤 6

Step 6
Do not yank the upper case off quickly. The case is attached to the logic board via a ribbon cable.
  • Do not yank the upper case off quickly. The case is attached to the logic board via a ribbon cable.

  • Lift up at the rear of the case and work your fingers along the sides, freeing the case as you go. Once you have freed the sides, you may need to rock the case up and down to free the front of the upper case (there are some hidden plastic clips that need to be clicked off).

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可