跳转到主内容
英语
中文

正翻译步骤 8

步骤 8
Remove the following seven screws:
  • Remove the following seven screws:

  • Six 1.6 mm Phillips screws securing the the trackpad to the upper case.

  • One 1.4 mm T5 Torx set screw near the front edge of the upper case.

  • During reassembly, do not over-tighten the set screw, as the button will cease to click at a certain point. Adjust the set screw until the movable side of the trackpad has minimal play.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可