跳转到主内容

修复你的物品

维修的权力

配件 & 工具

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 3

步骤 3
Pull off the black rubber stopper from your bottle of adhesive remover. Twist to loosen or remove the bottle cap before you cut the applicator tip. This unseals the bottle and allows the pressure to equalize before you cut the applicator tip. If you skip this step, the adhesive remover may spray out unexpectedly when the tip is cut.
  • Pull off the black rubber stopper from your bottle of adhesive remover.

  • Twist to loosen or remove the bottle cap before you cut the applicator tip.

  • This unseals the bottle and allows the pressure to equalize before you cut the applicator tip. If you skip this step, the adhesive remover may spray out unexpectedly when the tip is cut.

  • Use scissors to cut off the sealed tip of the applicator.

  • Cutting close to the narrow tip will give you better control so you can apply the adhesive remover in small amounts.

  • Twist and close the bottle cap securely before you proceed further.

打开你的胶水溶解液的盖子。

在你剪开口子之前,请拧松或去除瓶盖。

这样做的目的是确保瓶内外的压力一致。如果你跳过这个步骤,也许在剪开尖端的那一刻,胶水溶解液会喷出来。

使用剪刀剪去胶水溶解液涂抹头的尖端。

尽量靠近尖端剪,这样你在接下来的过程中更好操作。

在继续之前拧开和盖紧瓶盖。

在开源创作共享许可协议下,你的投稿已被许可