跳转到主内容

修复你的物品

维修的权力

配件 & 工具

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 12

步骤 12
If using liquid adhesive remover, apply a few more drops under each of the final two, middle cells. It may help to elevate one side of your MacBook Pro a few inches so that the adhesive remover flows in the correct direction, underneath the battery cells. You can use a sturdy book or foam block to prop up one side of your MacBook Pro while you work. Allow 2-3 minutes for the adhesive remover to penetrate before you continue.
  • If using liquid adhesive remover, apply a few more drops under each of the final two, middle cells.

  • It may help to elevate one side of your MacBook Pro a few inches so that the adhesive remover flows in the correct direction, underneath the battery cells. You can use a sturdy book or foam block to prop up one side of your MacBook Pro while you work.

  • Allow 2-3 minutes for the adhesive remover to penetrate before you continue.

  • Gently folding the right-most battery cells out of the way, insert a plastic card under the right center cell.

  • Push the card in about half of its length to cut the adhesive holding the battery cell to the case.

  • Be sure to avoid the trackpad control board. Aim the card up toward the logic board, where the adhesive is.

  • Leave the card in place to keep the adhesive from re-sealing.

如果使用液体粘合剂去除剂,在每个最外侧的两个中间再加几滴去除剂。

这可能有助于将MacBook Pro的一面提升几英寸,使得粘合剂去除剂以正确的方向在电池包下流动。 在工作时,您可以使用坚固的书或泡沫块来支撑MacBook Pro的一面。

在继续之前,让胶水去除剂渗透2-3分钟。

轻轻折叠最右边的电池,将塑料卡正确插入中央电池包下。

将卡片推入其长度的一半左右,来切割电池和外壳之间的粘合剂。

避免碰到触摸板,将卡对准粘合剂所在的地方-逻辑板。

将卡放在适当位置上,以防止粘合剂重新密封。

在开源创作共享许可协议下,你的投稿已被许可