跳转到主内容

修复你的物品

维修的权力

配件 & 工具

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 11

步骤 11
Leave the second card in the corner between the two left cells. If using an iOpener, reheat it and apply it to the central battery cells. As before, leave the iOpener in each position for about a minute, reheating in between, to heat each half of the center cells.
  • Leave the second card in the corner between the two left cells.

  • If using an iOpener, reheat it and apply it to the central battery cells.

  • As before, leave the iOpener in each position for about a minute, reheating in between, to heat each half of the center cells.

  • In the following steps, you can either use a third card, or the card from the right corner. The right corner adhesive should be dry/cool enough that the cells can easily be pulled up again when needed.

将第二张卡牌留在两个左侧电池之间的角落。

如果使用iOpener,请重新加热并将其应用于中央电池。

像以前一样,将iOpener放在每个位置大约一分钟,再加热,以加热每半个中心位置。

在以下步骤中,您可以使用第三张卡或右侧的卡片。 右角粘合剂应该是干燥/冷却的,使得在需要时可以容易地再次拉出电池。

在开源创作共享许可协议下,你的投稿已被许可